Voodoo Design & Engineering teamed up with M-Engineering, the leaders in ECU Tuning, to deliver a potent Stage 2 Power Package for the McLaren 570S / 570GT.

This Power Package combines our Voodoo Design Exhaust and Downpipes with M Engineering's ECU Calibration and BMC Air Filters. M-Engineering diverges from the typical tuning troupe with a focus on bringing the market unique custom features and calibrations that result in record setting performance, reliability, and an immersive driving experience.

Using 91 octane fuel, this Stage 2 Power Package reliably increases +127whp & 141 ft-lbs tq max gains to deliver an impressive 654 hp / 580 ft. lb. at the wheels.

Voodoo Design McLaren 570S Stage 1 Power Package Includes:

• Voodoo Design & Engineering Exhaust

• Voodoo Design & Engineering Bypass Pipes

• BMC Air Filters

• M-Engineering M-Tuner Calibration Suite

• M-Engineering ECU Tune Motorsports Package (Optional)

Voodoo Design & Engineering Exhaust Features

• Produces more aggressive exhaust sound

• Reduces restriction to increase horsepower, torque, and throttle response

• Type 304 stainless steel 3 inch tubing

• Utilizes x-pipe for proper scavenging of exhaust pulse and a higher exhaust pitch

• CNC machined flanges for a perfect fitment

• Laser cut exhaust hanger brackets for added strength and beauty

• Meticulously TIG welded and back-purged

• CAD designed and flow bench tested for perfect fitment and optimum performance

• Cerakote thermal finish to reduce radiated heat and provide protection against corrosion and discoloration.

• Direct bolt-on replacement with no modification to vehicle

• Hand built in the USA

BMC Air Filter Features

• Made of a proprietary cotton material are washable and re-oilable with a BMC Filter Cleaning Kit

• Provides nearly 40% greater airflow than paper while stopping impurities from 7 microns up

• Provides a steady stream of clean air to the engine, resulting in much more consistent and efficient power

• Direct, drop in fitment with no modifications necessary

M-Tuner Calibration Suite

M-Tuner from M-Engineering allows drivers a multitude of aftermarket options which are otherwise unavailable in the market space.

Using M-Tuner, users can pick map slots on the fly based on driving conditions, octane, or demanded power output by using the cruise control stalk, as well as take advantage of all-out motorsport features like Rolling Anti-Lag, Boost by Gear, and Staged Injection that have been, until now, relegated to much more expensive stand alone, aftermarket, ECUs.

When it comes to McLaren, M-Engineering is the authority on tuning the factory ECU and related control systems. As of publishing this document M-Engineering has tuned the fastest McLarens on the planet in every tangible category. This includes 1/4 mile E.T., 1/4 mile trap speed, 1/2 mile trap speed, 60-130mph, 100-200kph, & 100-150mph.

Features

• Live Map Switching

• This includes stage calibrations for Stage 1 & Stage 2 vehicle configuration. Remote custom tuning is available for different vehicle configurations as well.

Performance Stage 1 & Stage 2 calibrations include the following map slots by default:

• Slot 1 - 91 Octane

• Slot 2 - 93 Octane

• Slot 3 - 100+ Octane

• Slot 4 - Valet (Limits boost, load, and throttle)

• Datalogging

• Live Data

• Clear Faults

• Dyno Mode Enable/Disable

• Auto Start/Stop Disable

• Left Foot Braking

• Kickdown Disable

• Loud Start

M-Engineering ECU Tune Motorsports Package Features (Optional)

• M-Engineering Motorsport Package is for those who are looking for an edge with even more features past Map Switching, Data Logging, and other basic M-Engineering features.

• Please note, this product first requires the purchase of M-Engineering ECT Tune and is not a standalone product.

• Available as optional add one for M-Engineering Single File Calibration or M-Tuner Calibration Suite

Motorsport Package Includes:

• Rolling Anti-Lag

• Custom Boost Control

• Custom Engine Safeties

• Custom Injector Characterization

DISCLAIMER:

This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights.

Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.